![Dr Mehmet Kartal Dr Mehmet Kartal](/img/200x200/staffpages/uploads/s05mk4/26f6111.jpg)
Reader
- About
-
- Email Address
- mehmet.kartal@abdn.ac.uk
- Telephone Number
- +44 (0)1224 272495
- Office Address
School of Engineering, University of Aberdeen, Fraser Noble Building (room 252), King’s College Aberdeen, AB24 3UE, United Kingdom
- School/Department
- School of Engineering
Biography
Work Experience
Reader n Mechanical Engineering, University of Aberdeen, 08/2021 - Present
Senior Lecturer in Mechanical Engineering, University of Aberdeen, 08/2016 - 07/2021
Lecturer in Mechanical Engineering, University of Aberdeen, 09/2014 - 07/2016
Post-doctoral Research Assistant, University of Oxford, 01/2008 - 08/2014
Memberships and Affiliations
- Internal Memberships
-
Coordinator of Post-Graduate Research Students
Programme Coordinator for the MSc in Advanced Mechanical Engineering
Programme Coordinator for the MSc in Advanced Structural Engineering
Coordinator of Non-Destructive Testing Services (μCT)
- External Memberships
-
A panel member of the Royal Society’s Committee (2016-Present)
A Member of the Institute of Mechanical Engineers (2020-Present)
Act as External Examiner for PhD viva (2016-Present)
A reviewer for
- Additive Manufacturing
- Experimental Mechanics
- International Journal of Fatigue
- Wear
- Materials & Design
- Composites Part A
- Engineering Fracture Mechanics
- International Journal of Solids and Structures
- International Journal of Mechanical Sciences
- The Journal of Strain Analysis for Engineering Design
- Tribology International
- ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik
- The Journal of Engineering
- Strojniški vestnik – Journal of Mechanical Engineering
- International Journal of Pressure Vessels and Piping
- Research
-
Research Overview
Micromechanical modelling
Contact mechanics
Residual stresses and eigenstrain theory
Experimental mechanics
Mechanics of materials
Funding and Grants
External Grants Awarded
- M.E. Kartal. 3D in-situ based methodology for optimizing the mechanical performance of selective laser melted aluminium alloys. EPSRC, £101k, 2018-2021
- M.E. Kartal, A. Karadimos and R.D. Neilson. Designing new Umbelicals for deep sea applications (Phase 2). Oil and Gas Innovation Centre (Phase 2), £260, 2018-2020
- M.E.Kartal, A. Karadimos and R.D. Neilson. Designing new Umbelicals for deep sea applications (Phase 1). Oil and Gas Innovation Centre, £68k, 2017-2018
- M.E. Kartal. Multiscale Experimental and Computational Techniques for Optimizing Selective Laser Melting Additive Manufacturing Process Parameters. NSIRC/TWI PhD Sponsorship 2016, £44k, 2016-2019
- M.E. Kartal., I. Guz and M. Kashtalyan. KTP between University of Aberdeen and Westerton. Department of Trade and Industry (Knowledge Transfer Partnership), £150k, 2016-2017.
- M.E. Kartal. Three-dimensional in-situ measurements of deformation using the x-ray microscope and microtest stage. The Royal Society Research Grant, £15k, 2015-2016.
- A.C.F. Cocks and M.E. Kartal. Measurements of residual stresses in ultra-thick steel welds and analysis of relationship between residual stresses and fatigue fracture. Welding and Joining Research Group Technical Research Laboratories POSCO, $50k, 2011-2013.
- Teaching
-
Teaching Responsibilities
EM3028:Engineering Materials
EG4529/EM4529 Nonlinear Mechanics
EG5096 Fatigue and Fracture Mechanics
EG50T7 Subsea Construction, Inspection and Maintenance
EG5565 MEng Group Design
EG4013 MEng/BEng Individual Projects in Mechanical Engineering
- Publications
-
Page 1 of 2 Results 1 to 50 of 72
Interaction of defects, martensitic transformation and slip in metastable body centred cubic crystals of Ti-10V-2Fe-3Al: A study via crystal plasticity finite element methods (CPFEM)
International Journal of Damage MechanicsContributions to Journals: ArticlesThe Influence of Post-Thermal Treatments on Microstructure and Mechanical Properties in A20X Alloy Fabricated through Powder Bed Fusion
Journal of Manufacturing Processes, vol. 125, pp. 93-110Contributions to Journals: ArticlesCrystal plasticity based constitutive model for deformation in metastable β titanium alloys
Modelling and Simulation in Materials Science and Engineering, vol. 32, no. 5, 055023Contributions to Journals: ArticlesResidual Stresses in Alloy IN718 Produced through Modulated Laser Powder Bed Fusion
Experimental Mechanics, vol. 64, pp. 181-195Contributions to Journals: ArticlesThe static friction peak in reciprocating sliding
Tribology International, vol. 180, 108240Contributions to Journals: Articles3D Printing and Rapid Replication of Advanced Numerically Generated Rough Surface Topographies in Numerous Polymers
Advanced Engineering Materials, vol. 25, no. 1, 2200832Contributions to Journals: ArticlesOptimisation of interlocking microstructured adhesive joints via finite element modelling, design of experiments and 3D printing
International Journal of Adhesion and Adhesives, vol. 120, 103292Contributions to Journals: ArticlesInvestigation of Novel Post-Thermal Treatments of Alloy 718 Fabricated by Modulated Laser Powder Bed Fusion
Materials Science and Engineering A, vol. 849, 143502Contributions to Journals: ArticlesA Multiscale Constitutive Model for Metal Forming of Dual Phase Titanium Alloys by Incorporating Inherent Deformation and Failure Mechanisms
Modelling and Simulation in Materials Science and Engineering, vol. 30, no. 2, 025008Contributions to Journals: ArticlesDeformation of AlSi10Mg parts manufactured by Laser Powder Bed Fusion: In-situ measurements incorporating X-ray micro computed tomography and a micro testing stage
Procedia Structural Integrity, vol. 35, pp. 168-172Contributions to Journals: ArticlesEffect of Hydrogen and Defects on Deformation and Failure of Austenitic Stainless Steel
Recent Developments in Analytical Techniques for Corrosion Research. Toor, I. U. (ed.). Springer International Publishing AG, pp. 235-257, 23 pagesChapters in Books, Reports and Conference Proceedings: Chapters- [ONLINE] DOI: https://doi.org/10.1007/978-3-030-89101-5_11
- [ONLINE] View publication in Scopus
Mesoscale Model for Predicting Hydrogen Damage in Face Centred Cubic Crystals
Physical mesomechanics, vol. 24, pp. 588-597Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1134/S1029959921050106
Evolution of internal pores within AlSi10Mg manufactured by laser powder bed fusion under tension: As-built and heat treated conditions
Materials & Design, vol. 204, 109645Contributions to Journals: ArticlesComputational Modelling of Microstructural Deformation in Metastable β Titanium Alloys
UK Association of Computational Mechanics ConferenceContributions to Conferences: AbstractsEnhancing strength and toughness of adhesive joints via micro-structured mechanical interlocking
International Journal of Adhesion and Adhesives, vol. 105, 102775Contributions to Journals: ArticlesFriction of flat and micropatterned interfaces with nanoscale roughness
Tribology International, vol. 153, 106563Contributions to Journals: ArticlesTailorable and Repeatable Normal Contact Stiffness via Micropatterned Interfaces
Tribology Letters, vol. 69, 106Contributions to Journals: ArticlesCrystal Plasticity based Study to Understand the Interaction of Hydrogen, Defects and Loading in Austenitic Stainless Steel Single Crystals
International Journal of Hydrogen Energy, vol. 45, no. 56, pp. 32632-32647Contributions to Journals: ArticlesHydrogen effect on plastic deformation and fracture in austenitic stainless steel
Contributions to Journals: Conference Articles- [ONLINE] View publication in Scopus
Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography: influence of processing parameters and heat treatment
Materials Characterization, vol. 163, 110225Contributions to Journals: ArticlesModelling Hydrogen Induced Stress Corrosion Cracking in Austenitic Stainless Steel
Journal of Mechanics, vol. 36, no. 2, pp. 213-222Contributions to Journals: ArticlesThe influence of pulsed laser powder bed fusion process parameters on Inconel 718 material properties
Materials Science and Engineering A, vol. 769, 138527Contributions to Journals: ArticlesContrast-enhancing staining for microCT-based visualisation of the fibrous structure in the human Achilles tendon enthesis
Contributions to Conferences: Oral PresentationsA CPFEM based study to understand the void growth in high strength dual-phase Titanium alloy (Ti-10V-2Fe-3Al)
International Journal of Plasticity, vol. 122, pp. 188-211Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijplas.2019.07.002
- [OPEN ACCESS] http://aura.abdn.ac.uk/bitstream/2164/14653/1/Umair_Manuscript_2019_rev3.pdf
- [ONLINE] View publication in Mendeley
- [ONLINE] View publication in Scopus
Analysing size and shape of internal processing defects within selective laser melted aluminium alloy using x-ray micro computed tomography
Alloys for Additive Manufacturing Symposium 2019, pp. 49-49Contributions to Conferences: AbstractsEffect of post-thermal treatments on microstructure and mechanical properties of L-PBF IN718 material
Contributions to Conferences: PapersInfluence of recycled Inconel 718 powder on pulsed laser powder bed fusion additive manufacturing material
Contributions to Conferences: PapersCharacterisation of heat treated, additively manufactured Inconel 718
Contributions to Conferences: PapersRepresentative volume element (RVE) based crystal plasticity study of void growth on phase boundary in titanium alloys
Computational Materials Science, vol. 161, pp. 346-350Contributions to Journals: ArticlesHydrogen effect on fracture behaviour of austenitic stainless steel
Contributions to Conferences: PapersThe inclusion of short-transverse displacements in the eigenstrain reconstruction of residual stress and distortion in in740h weldments
Journal of Manufacturing Processes, vol. 36, pp. 601-612Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.jmapro.2018.10.047
Probing the compressive failure mechanisms in syntactic foam using X-ray micro-computed tomography
Contributions to Conferences: PapersCharacterisation of Additively Manufactured Inconel 718 via Laser Powder Bed Fusion Additive Manufacturing
Contributions to Conferences: PapersContribution of finite element analyses to crack-like flaw assessments in a gas pipeline
International Journal of Pressure Vessels and Piping, vol. 161, pp. 41-49Contributions to Journals: ArticlesHydrogen effect on plastic deformation and void growth in austenitic stainless steel
Contributions to Conferences: PapersRVE based crystal plasticity study of void growth on phase boundary in titanium alloys
Contributions to Conferences: PapersThree-dimensional in situ observations of compressive damage mechanisms in syntactic foam using X-ray microcomputed tomography
Journal of Materials Science, vol. 52, no. 17, pp. 10186-10197Contributions to Journals: ArticlesEffect of SLM process parameters on porosity and surface roughness of Inconel 718
The National Structural Integrity Research Centre (NSIRC) Conference 2017Contributions to Conferences: PostersEffect of SLM process parameters on porosity, surface roughness and microstructure of Inconel 718
European Congress and Exhibition on Advanced Materials and ProcessesContributions to Conferences: PostersRepresentative Volume Element (RVE) based crystal plasticity study of void growth at phase boundary in titanium alloys
7th National Student Conference in Metallic MaterialsContributions to Conferences: PostersThe Influence of welding procedure and plate geometry on residual stresses in thick components
International Journal of Solids and Structures, vol. 80, pp. 420-429Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijsolstr.2015.10.001
The effect of specimen size and surface conditions on the local mechanical properties of 14MoV6 ferritic–pearlitic steel
Materials Science and Engineering A, vol. 651, pp. 810-821Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.msea.2015.11.037
Crystal Plasticity based Finite Element Analysis of Void Growth in High Strength Alloys
Contributions to Conferences: PapersDetermination of sub-surface stresses at inclusions in single crystal superalloy using HR-EBSD, crystal plasticity and inverse eigenstrain analysis
International Journal of Solids and Structures, vol. 67-68, pp. 27-39Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijsolstr.2015.02.023
Analytical Solutions for Calculating Residual Stresses from Experimental Measurements Using the Contour Method
9th European Solid Mechanics ConferenceContributions to Conferences: Abstracts- [ONLINE] http://www.esmc2015.org/
The effect of crystallographic orientation on crack tip stress fields in hcp titanium
20th European Conference on FractureContributions to Conferences: Abstracts- [ONLINE] http://www.ecf20.no
Effects of crystallographic orientation and grain morphology on crack tip stress state and plasticity
International journal of fatigue, vol. 61, no. 46-58, pp. 46-58Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijfatigue.2013.11.022
Measurement and modelling of interface stiffness in frictional contacts
Chapters in Books, Reports and Conference Proceedings: Conference ProceedingsAnalytical solutions for determining residual stresses in two-dimensional domains using the contour method
Proceedings of the Royal Society A: Mathematical, Physical, and Engineering Sciences, vol. 469, no. 2159, 20130367Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1098/rspa.2013.0367
A comparison of contact stiffness measurements obtained by the digital image correlation and ultrasound techniques
Experimental Mechanics, vol. 53, no. 7, pp. 1245-1263Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1007/s11340-013-9718-5