Last modified: 25 Sep 2019 09:58
A general engineering course that provides insight into the two main conservation principles, mass and energy. Processes are usually described through block diagrams. This language, common to many disciplines in engineering, helps the engineer to look at their processes with an analytical view. Degree of freedom analysis is addressed, emphasising its importance to solve a set of linear equations that model fundamental balances of mass. Practical examples of Energy balances are displayed, bringing Thermodynamics to a practical level. Heat Transfer is introduced. Process control is introduced, explaining basic control techniques and concepts, i.e sensors, feedback, control loops and PID controllers.
| Study Type | Undergraduate | Level | 2 |
|---|---|---|---|
| Term | First Term | Credit Points | 15 credits (7.5 ECTS credits) |
| Campus | Aberdeen | Sustained Study | No |
| Co-ordinators |
|
||
The technical content of the course is delivered in 7 sections. An introduction to process engineering is given in the wider context such that students might understand the types of roles and responsibilities of practical process engineers. Dimensions and systems of units are given specific focus such is their importance in all engineering disciplines. Process communication is covered in a module which deals with block diagrams, process flow diagrams, piping and instrumentation diagrams and stream lists. Two of the most critical foundations upon which a degree in engineering is based are material balancing and energy balancing; Energy balances are covered in detail on system with and without mass transfer to the environment (open and closed systems). The fundamentals of transfer processes are then introduced with specific focus being given to heat transfer. The course ends with an introduction to automatic control of systems and processes.
Information on contact teaching time is available from the course guide.
| Assessment Type | Summative | Weighting | 20 | |
|---|---|---|---|---|
| Assessment Weeks | Feedback Weeks | |||
| Feedback |
Students receive whole-class feedback via MyAberdeen. Active participation is sought through a discussion board in MyAberdeen. |
|||
| Knowledge Level | Thinking Skill | Outcome |
|---|---|---|
|
|
||
| Assessment Type | Summative | Weighting | 80 | |
|---|---|---|---|---|
| Assessment Weeks | Feedback Weeks | |||
| Feedback | ||||
| Knowledge Level | Thinking Skill | Outcome |
|---|---|---|
|
|
||
| Assessment Type | Formative | Weighting | ||
|---|---|---|---|---|
| Assessment Weeks | Feedback Weeks | |||
| Feedback |
First class test will be released in week 11 or 12. |
|||
| Knowledge Level | Thinking Skill | Outcome |
|---|---|---|
|
|
||
| Assessment Type | Formative | Weighting | ||
|---|---|---|---|---|
| Assessment Weeks | Feedback Weeks | |||
| Feedback |
Second class test will be released in week 15 or 16. |
|||
| Knowledge Level | Thinking Skill | Outcome |
|---|---|---|
|
|
||
| Assessment Type | Summative | Weighting | 100 | |
|---|---|---|---|---|
| Assessment Weeks | Feedback Weeks | |||
| Feedback | ||||
| Knowledge Level | Thinking Skill | Outcome |
|---|---|---|
|
|
||
| Knowledge Level | Thinking Skill | Outcome |
|---|---|---|
|
|
||
We have detected that you are have compatibility mode enabled or are using an old version of Internet Explorer. You either need to switch off compatibility mode for this site or upgrade your browser.
