Last modified: 23 Jul 2024 10:44
Offshore production of oil and gas requires transportation of the oil and gas from where it is produced to shipping vessels, storage tanks or refinery. The transportation is done using pipelines which are installed on the seabed. This course examines the engineering and scientific concepts that underpin the selection of the material and size of such pipelines as well as safe installation and operation. The environmental impact and the role played by the seabed profile are also discussed. Contribution from industry-based practicing engineers is used to inform students of current practices and technologies in subsea pipelines.
| Study Type | Postgraduate | Level | 5 |
|---|---|---|---|
| Term | Second Term | Credit Points | 15 credits (7.5 ECTS credits) |
| Campus | Aberdeen | Sustained Study | No |
| Co-ordinators |
|
||
This course focuses on fundamental relationship between the stresses and deformation developed in subsea pipelines and the imposed installation, environmental and service loads. Significant emphasis is placed on the design implications of the material deformation, geometric imperfection, and variability in the material properties. Methodologies for mitigating against pipeline failure, including seabed preparation and corrosion prevention are discussed. Environmental impacts of pipeline installation and associated legislative framework are examined. Expertise in the use of pipeline design Standards (e.g. BS PD8010 and DNV-OS-F101) is developed throughout the course. Students carry out a continuous assessment exercise to enhance their intellectual ability and transferable skills.
The topics covered will include:
• Overview of pipeline design, including commercial and environmental considerations, national and international design codes, and technological challenges.
• Site investigation and pipeline routing, including soil classification, site survey and preparation, , HSE requirements, human and environmental factors.
• Stress analysis based design.
• Design against failure, including buckling and collapse.
• Pipeline on-bottom stability, hydrodynamic loads on pipelines, pipeline-soil interaction response and modelling, pipeline seabed spanning response and evaluation.
• External corrosion of pipelines and its prevention.
• Pipeline ancillary equipment design including PLEMs, protection devices, etc.
Pipeline installation methods and installation analysis techniques.
Information on contact teaching time is available from the course guide.
| Assessment Type | Summative | Weighting | 30 | |
|---|---|---|---|---|
| Assessment Weeks | Feedback Weeks | |||
| Feedback |
Group oral presentation. Feedback through MyAberdeen and email. |
|||
| Knowledge Level | Thinking Skill | Outcome |
|---|---|---|
|
|
||
| Assessment Type | Summative | Weighting | 70 | |
|---|---|---|---|---|
| Assessment Weeks | Feedback Weeks | |||
| Feedback |
Feedback through MyAberdeen and email. |
|||
| Knowledge Level | Thinking Skill | Outcome |
|---|---|---|
|
|
||
There are no assessments for this course.
| Assessment Type | Summative | Weighting | ||
|---|---|---|---|---|
| Assessment Weeks | Feedback Weeks | |||
| Feedback | ||||
| Knowledge Level | Thinking Skill | Outcome |
|---|---|---|
|
|
||
| Knowledge Level | Thinking Skill | Outcome |
|---|---|---|
| Factual | Remember | ILO’s for this course are available in the course guide. |
We have detected that you are have compatibility mode enabled or are using an old version of Internet Explorer. You either need to switch off compatibility mode for this site or upgrade your browser.
