Last modified: 27 Feb 2018 15:45
This course looks at the tools available to analyse the lithology and fluid content of a reservoir and how petrophysicists work with other discipline to estimate e hydrocarbon volumes in the subsurface. The course identifies the multiple data sources required for reservoir evaluation, emphasising integration of all available data, potential sources of error and uncertainty within the data. It shows how to relate wireline data to core; gives a solid grounding in the acquisition and evaluation of routine (RCA) and special (SCAL) core analysis datasets; and teaches how to apply these principles to a fully computerised formation evaluation workflow
Study Type | Postgraduate | Level | 5 |
---|---|---|---|
Term | Second Term | Credit Points | 15 credits (7.5 ECTS credits) |
Campus | Old Aberdeen | Sustained Study | No |
Co-ordinators |
|
- Formative evaluation, sampling and testing
-
Understand scale of core, logs, wells, seismic in relation to the reservoir
-
Petrophysics definition and contribution to formation evaluation
- The
nature, origin and properties of reservoir rocks including the main
petrophysical paramenters, porosity, permeability and water saturation
-
Definitions of gross and net reservoir intervals and calibration to core
-
Introduction to coring and the associated core analysis data
-
Understanding the borehole environment
- Mud log
data, introduction and interpretation
-
Evolution of logging tool technology, methods of conveyance and depth
measurement
-
Borehole quality and the caliper log
-
Formation evaluation data, principles of tool measurement and applications
including gamma ray, SP log, porosity logs, resistivity and formation pressure
-
Planning data acquisition programmes
- Use of
log header information
- Depth
control and validity
- Log
quality assurance for standard formation evaluation tool set
-
Capilliary distribution of fluids, free water level and fluid contacts
-
Quick-look interpretation work flow through lithology recognition,
reservoir/non-reservoir discrimination, fluid types and contacts, porosity
estimation, formation water resistivity, water saturation, net reservoir and
net pay.
-
Computerised quick look petrophysics
-
reservoir quality controls and rock typing methods
- Core
calibration of porosity and water saturation
- Mineral
volume methods
- Shaly
sand analysis
-
Interpretation in thin beds
-
Advanced logging tool interpretation techniques
Information on contact teaching time is available from the course guide.
one two hour written examination (30%) and continuous assessment (70%)
There are no assessments for this course.
We have detected that you are have compatibility mode enabled or are using an old version of Internet Explorer. You either need to switch off compatibility mode for this site or upgrade your browser.