Last modified: 27 Feb 2018 12:43
Offshore production of oil and gas requires transportation of the oil and gas from where it is produced to shipping vessels, storage tanks or refinery. The transportation is done using pipelines which are installed on the seabed. This course examines the engineering and scientific concepts that underpin the selection of the material and size of such pipelines as well as safe installation and operation. The environmental impact and the role played by the seabed profile are also discussed. Contribution from industry-based practicing engineers is used to inform students of current practices and technologies in subsea pipelines.
| Study Type | Postgraduate | Level | 5 |
|---|---|---|---|
| Term | Second Term | Credit Points | 15 credits (7.5 ECTS credits) |
| Campus | Online | Sustained Study | No |
| Co-ordinators |
|
||
This course is available only to students on the distance learning programme. Lecture materials are provided online on MyAberdeen for self study.
The course focuses on fundamental relationship between the stresses and deformation developed in subsea pipelines and the imposed installation, environmental and service loads. Significant emphasis is placed on the design implications of the material deformation, geometric imperfection, and variability in the material properties. Methodologies for mitigating against pipeline failure, including seabed preparation and corrosion prevention are discussed. Environmental impacts of pipeline installation and associated legislative framework are examined. Expertise in the use of pipeline design Standards (e.g. BS PD8010 and DNV-OS-F101) is developed throughout the course. Students carry out a continuous assessment exercise to enhance their intellectual ability and transferable skills.
The topics covered will include:
• Overview of pipeline design, including commercial and environmental considerations, national and international design codes, and technological challenges.
• Site investigation and pipeline routing, including soil classification, site survey and preparation, , HSE requirements, human and environmental factors.
• Stress analysis based design.
• Design against failure, including buckling and collapse.
• Pipeline on-bottom stability, hydrodynamic loads on pipelines, pipeline-soil interaction response and modelling, pipeline seabed spanning response and evaluation.
• External corrosion of pipelines and its prevention.
• Pipeline ancillary equipment design including PLEMs, protection devices, etc.
Pipeline installation methods and installation analysis techniques.
For students studying for MSc Subsea Engineering. EG55F2 is the campus version of the course.
Information on contact teaching time is available from the course guide.
Three-hour written examination paper (80%) and continuous assessment (20%).
The continuous assessment will be based on the report on a design exercise.
For resit, three-hour written examination paper (80%) and continuous assessment (20%). The continuous assessment mark from the first attempt will be carried forward to the resit.
There are no assessments for this course.
a) Assessment grade and written feedback will be provided on the design report within three weeks of submitting the report.
b) The discussion board on myAberdeen will used to provide feedback and respond to student questions and comments.
c) Students requesting feedback on their exam performance should make an appointment with the course coordinator within two weeks of the publication of the exam results.
We have detected that you are have compatibility mode enabled or are using an old version of Internet Explorer. You either need to switch off compatibility mode for this site or upgrade your browser.
