production
Skip to Content

EM3522: DESIGN OF MECHANICAL ELEMENTS (2023-2024)

Last modified: 23 Jul 2024 10:43


Course Overview

Aimed at students interested in mechanical engineering and aims to equip students with the skills and knowledge required to take a design requirement/concept to a fully implemented product.  It will provide an overview of a multi-stage design methodology followed by procedures for the detailed design of various mechanical elements including gears, shaft and bearings.  These procedures will include design to resist fatigue failure and will be taught using an example product.  The course will include aspects of sustainability and choice of method for manufacture. Assessed through a series of group design exercises.

Course Details

Study Type Undergraduate Level 3
Term Second Term Credit Points 10 credits (5 ECTS credits)
Campus Aberdeen Sustained Study No
Co-ordinators
  • Dr M. Menshykova

Qualification Prerequisites

  • Either Programme Level 3 or Programme Level 4

What courses & programmes must have been taken before this course?

  • One of BSc Engineering (Mechanical) or Bachelor of Engineering in Engineering (Mechanical) or Bachelor of Engineering in Eng (Mech with European Studies) or Master of Engineering in Mechanical Engineering or Master of Engineering in Mech Eng with Euro Studs or Master of Engineering in Mech Eng with Subsea Technology or Bachelor of Engineering in Eng (Mech with Oil & Gas Studies) or Master of Engineering in Mechanical Eng with Management or Bachelor of Engineering in Eng (Mechanical and Electrical) or Master of Engineering in Mechanical & Electrical Eng
  • Any Undergraduate Programme
  • EG2501 Design & Computing in Engineering Practice (Passed)
  • Engineering (EG)
  • EG2012 Engineering Mathematics 2 (Passed)

What other courses must be taken with this course?

None.

What courses cannot be taken with this course?

Are there a limited number of places available?

No

Course Description

The course starts with a review of the five-stage design procedure including methods of evaluation of alternative designs.  This is followed by lectures on fitness for purpose, sustainability in design.

An overview of the application of fatigue analysis in design including the use of S/N curves and the modified Goodman diagram for the assessment of fatigue life for fluctuating loading is presented.  This is followed by a series of design lectures on the detail design of mechanical components including:

·         gears design using the modified Lewis formula

·         rolling element bearing selection and life estimation

·         static and fatigue analysis of shafts with combined torsional, bending and axial loading

·         seal selection for rotating and sliding applications

·         threaded connection design for fatigue loading, covering failure by opening of the joint and deformation of the threaded element.

·         spring design for tension, compression and torsional coil springs.

Dimensioning for manufacture, including the effect of dimensioning from various datum points and chain dimensioning, tolerancing of dimensions and limits and fits is also included.  The course concludes with a section on the choice of manufacturing process for prototype/one off, small batch and mass production for manufacture including welding, machining from billet, casting, forging and moulding.

Total 16 one-hour lectures and 11 three-hour design sessions 


Contact Teaching Time

Information on contact teaching time is available from the course guide.

Teaching Breakdown

More Information about Week Numbers


Details, including assessments, may be subject to change until 30 August 2024 for 1st term courses and 20 December 2024 for 2nd term courses.

Summative Assessments

Design Project: Group

Assessment Type Summative Weighting 50
Assessment Weeks Feedback Weeks

Look up Week Numbers

Feedback
Learning Outcomes
Knowledge LevelThinking SkillOutcome
Sorry, we don't have this information available just now. Please check the course guide on MyAberdeen or with the Course Coordinator

Design Project: Individual

Assessment Type Summative Weighting 50
Assessment Weeks Feedback Weeks

Look up Week Numbers

Feedback
Learning Outcomes
Knowledge LevelThinking SkillOutcome
Sorry, we don't have this information available just now. Please check the course guide on MyAberdeen or with the Course Coordinator

Formative Assessment

There are no assessments for this course.

Resit Assessments

Resubmission of failed element

Assessment Type Summative Weighting
Assessment Weeks Feedback Weeks

Look up Week Numbers

Feedback
Learning Outcomes
Knowledge LevelThinking SkillOutcome
Sorry, we don't have this information available just now. Please check the course guide on MyAberdeen or with the Course Coordinator

Course Learning Outcomes

Knowledge LevelThinking SkillOutcome
FactualRemember ILO’s for this course are available in the course guide.

Compatibility Mode

We have detected that you are have compatibility mode enabled or are using an old version of Internet Explorer. You either need to switch off compatibility mode for this site or upgrade your browser.