production
Skip to Content

EG50S1: FUNDAMENTAL SAFETY ENGINEERING AND RISK MANAGEMENT CONCEPTS (2018-2019)

Last modified: 22 May 2019 17:07


Course Overview

The course serves as the entrance to the field of safety and reliability engineering with the introduction of the basic concepts and tools of safety and risk management. Legal frames related to engineering safety are also introduced.

Contents include: Fundamentals of safety engineering; natural and man-made hazards; safety measures; accident and failure statistics; fundamentals of risk management; risk assessment techniques; classical reliability theory; modelling of engineering systems as series and parallel systems; redundancy; fault trees and event trees; availability and maintainability; UK safety legislation, including the Health and Safety at Work Act and its historical, offshore and other regulations.

Course Details

Study Type Postgraduate Level 5
Term First Term Credit Points 15 credits (7.5 ECTS credits)
Campus None. Sustained Study No
Co-ordinators
  • Dr Henry Tan

What courses & programmes must have been taken before this course?

  • Engineering (EG) (Studied)
  • Any Postgraduate Programme (Studied)

What other courses must be taken with this course?

None.

What courses cannot be taken with this course?

None.

Are there a limited number of places available?

No

Course Description

To have a good understanding on the technical and legislative needs for risk and reliability assessment. Some basic analysis tools. The following modules will be covered in the course: 

1.                   Fundamentals of risk management;

2.                   Classical reliability theory;

3.                   Failure mode and effects analysis (FMEA)

4.                   Reliability Block Diagram;

5.                   Fault Tree Analysis;

6.                   Event Tree Analysis;

7.                   Bayesian Network modelling;

8.                   UK safety legislations, including historic development. Health and Safety at Work Act, offshore and other regulations.

Further Information & Notes

For students studying MSc Safety & Reliability Engineering for Oil and Gas, MSc Renewable Energy Engineering, and MSc Oil & Gas Engineering and MSc Safety & Reliability Engineering

EG501D is the course code for the distance learning version.


Contact Teaching Time

Information on contact teaching time is available from the course guide.

Teaching Breakdown

More Information about Week Numbers


Details, including assessments, may be subject to change until 30 August 2024 for 1st term courses and 20 December 2024 for 2nd term courses.

Summative Assessments

1st attempt: 1 three-hour exam (80%) and continuous assessment (20%).

Resit: The re-sit will comprise of re-doing the failed element/s (exam and/or coursework assessment/s) from the 1st attempt with a maximum CGS mark of D3. The marks for other elements (successfully passed) will be carried over. Resit mark of either RP or RF will be recorded.

Formative Assessment

There are no assessments for this course.

Feedback

None.

Course Learning Outcomes

None.

Compatibility Mode

We have detected that you are have compatibility mode enabled or are using an old version of Internet Explorer. You either need to switch off compatibility mode for this site or upgrade your browser.