![Professor Maria Kashtalyan Professor Maria Kashtalyan](/img/200x200/staffpages/uploads/eng679/avatar/gJbIIiGKkL2SujsV7wtcQzd5RX0W5E35KtYbI0dB.jpeg)
MSc PhD
Personal Chair
- About
-
- Email Address
- m.kashtalyan@abdn.ac.uk
- Telephone Number
- +44 (0)1224 272519
- Office Address
School of Engineering, Fraser Noble Building, University of Aberdeen, Aberdeen AB24 3UE, Scotland UK
- School/Department
- School of Engineering
Biography
Professor Kashtalyan is Director of the Centre for Micro- and Nanomechanics. She joined the University of Aberdeen in 2002 as an EPSRC Advanced Research Fellow and was appointed a Lecturer in Engineering in 2004, promoted to Senior Lecturer in 2007, Reader in 2011, and Personal Chair in 2014.
Before joining the University of Aberdeen, Professor Kashtalyan was an EPSRC Advanced Research Fellow (2001-2002) and a Postdoctoral Research Associate (1998-2001) at the Department of Aeronautics, Imperial College London. She was also a Visiting Research Scientist at the Department of Engineering, University of Cambridge (1996-1997) and a recipient of the Royal Society/NATO Postdoctoral Research Fellowship (1998).
She authored more than 190 publications including more that 80 papers in peer-reviewed international scientific journals, 5 chapters in major reference books on composites, and 45 papers in peer-reviewed conference proceedings. Three of her papers were included into Top 25 most read articles of the European Journal of Mechanics A/Solids (July – September 2011), International Journal of Solids and Structures (April – June 2007) and European Journal of Mechanics A/Solids (July 2004 – March 2005).
In July 2020, Maria Kashtalyan became the new Editor-in-Chief of the Applied Composite Materials journal, published by Springer Nature, succeeding Professor Peter Beaumont, the founding editor of the journal, who stood at its helm for more than a quarter century.
Memberships and Affiliations
- Internal Memberships
-
- Convener of the Physical Sciences and Engineering Ethics Board, 2019 – present
- Convener of the Student Progress Committee for Engineering, 2015 – present
- Convener of the School Prizes Committee, 2015 – present
- Level 5 Co-ordinator, School of Engineering, 2014 – 2020
- Co-lead of the Engineering Athena SWAN Self-Assessment Team, 2014 – 2016
- Director of the Centre of Micro- and Nanomechanics (CEMINACS), 2013 – present
- Elected Member of the College Council, College of Physical Sciences, 2013 – 2016
- Elected Member of the Senatus Academicus, 2012 – 2018
- Member of the Physical Sciences and Engineering Ethics Board, 2012 – present
- Member of the School of Engineering working group on Workload Model, 2012 – present
- School Appeals Officer, 2011 – 2016
- Member of the School of Engineering working group on Curriculum Reform implementation, 2009-2010
- Member of the School of Engineering Undergraduate Teaching Committee, 2007 – 2020
- Member of the School of Engineering Student-Staff Liaison Committee, 2007 – 2020
- Level 4 Co-ordinator, School of Engineering, 2007 – 2020
- External Memberships
-
Member of the EPSRC Peer Review College, 2003 – present
Member, Local Organising Committee, IUTAM Symposium "Frontiers of Solid Mechanics for Energy Transition", 1-4 July 2024, Aberdeen, UK
Member, Local Organising Committee, 23rd International Conference on Composite Materials, 30 July - 4 August 2023, Belfast, UK
Member, International Scientific Committee of the 11th International Conference on Durability Analysis of Composite Systems (DURACOSYS 2014), 15-17 September 2014, Tokyo, Japan
Chair, Technical Session of the 21th European Conference on Fracture, 20-24 June 2016, Catania, Italy
Co-chair, International Workshop on “Modelling of Metal-Ceramic Composites”, 11 September 2013, Aberdeen, UK
Invited participant, Third Worldwide Failure Exercise (WWFE-III) – a set of activities to assess the capability of well-recognised theories and models to capture damage development in composites, 2007 – 2013
Chair, Technical Session of the 9th International Conference on Deformation and Fracture of Composites, 7-11 April 2007, Sheffield, UK
Chair, Technical Session of the 9th International Conference on Mechanical Behaviour of Materials, 25-29 May 2003, Geneva, Switzerland
Reviewer for:
- Composites Science and Technology
- Composite Structures
- Composites Part A: Applied Science and Manufacturing
- Composites Part B: Engineering
- Journal of Composite Materials
- European Journal of Mechanics A/Solids
- International Journal of Solids and Structures
- Thin-Walled Structures
- International Journal of Pressure Vessels and Piping
- Ocean Engineering
- International Journal of Fatigue and Fracture of Engineering Materials and Structures
- International Journal of Computational Methods in Science and Engineering
- ASME Journal of Applied Mechanics
- The Aeronautical Journal (reviewer of books on composites)
- AIAA Journal
- Plastics, Rubber and Composites
- Mechanics of Advanced Materials and Structures
- Journal of the Mechanical Behavior of Biomedical Materials
- Applied Mathematical Modelling
- Research
-
Research Overview
Professor Kashtalyan's main research results are in
- Solid mechanics and its applications
- Mathematical modelling of anisotropic heterogeneous materials
- Functionally graded materials and their applications
- Fibre-reinforced composite materials for aircraft, marine, automotive and civil applications
- Saint-Venant's principle for anisotropic and inhomogeneous materials
- Thermo-electro-mechanical coupling in layered systems
- Wave propagation in pre-stressed materials and structures
- Intra- and interlaminar damage and manufacturing defects in layered materials and structures
- Stiffness degradation and damage growth prediction for advanced composites
- Theory of anisotropic and inhomogeneous plates of variable thickness
Collaborations
Over the years, Professor Kashtalyan has established collaborative links with University of Cambridge, Imperial College London, University of Surrey, University of Sheffield, University of Bristol, National Physical Laboratory, DSTL (UK); Institute for Mechanics, Technical University of Berlin (Germany); Monash University, Melbourne (Australia); Laboratory for Technical Mechanics, University of Paderborn (Germany); University of Stuttgart (Germany); Institute of Lightweight Structures and Aerospace Engineering, Vienna University of Technology (Austria); ENSMA, Laboratory for Mechanics and Physics of Materials (France); Ecole Centrale de Lyon, University Lyon (France); Luleå Technical University (Sweden); Timoshenko Institute of Mechanics (Ukraine); University of Salerno (Italy); Universita di Napoli 'Federico II' (Italy); Texas A&M University (USA), University of New Hampshire (USA).
Funding and Grants
Professor Kashtalyan is currently a Principal Investigator of the Royal Society International Joint Project with the University of Bremen (Germany) on “Consistent plate theory for graded plates” (2017-2020). Recently, she was a Principal Investigator of the Royal Society International Joint Project with the University of Seville (Spain) on “Modelling multiple transverse cracking in composite laminates” (2015-2018), with Karlsruhe Technical University (Germany) on “Multi-scale modelling of metal-ceramic composites with lamellar microstructure” (2013-2016). She was also a Co-Investigator of the project “Novel structural and sealing components suitable for use in containing a range of aggressive chemicals” (2013-2014) funded by EPSRC, Technology Strategy Board and Balmoral Sectional Tanks Ltd. Previously, she was a Principal Investigator of two International Joint Projects funded by the Royal Society ("Indentation of anisotropic materials with gradients in elastic properties", 2010-2012, and "Three-dimensional solutions for transversely isotropic inhomogeneous media", 2009-2011), as well as three International Exchange Programme grants of The Royal Society of Edinburgh (2019, 2017, 2012). She was also a Co-Investigator of two research grants funded by EPSRC: "Effect of thermo-electro-mechanical coupling and non-linearities on dynamics processes in inelastic layered structures" (2007-2011) and "3-D dynamic problems for cracked layered materials with contact interaction of crack faces" (2007-2011).
- Teaching
-
Teaching Responsibilities
Professor Kashtalyan's teaching duties include:
- Level 4 course EM4529 Nonlinear Mechanics (from 2017-18) – 50% delivery of lectures and tutorials; around 80 students each year
- Level 5 course EM501Q Advanced Composite Materials (from 2015-16) – course design and development as a part of Curriculum Reform (CREF) implementation; course co-ordination; 100% delivery of lectures and tutorials; around 50 students each year
- Level 1 course EG1510 Fundamentals of Engineering Mechanics (from 2014-15) – 50% delivery of lectures, tutorials, labs; more than 200 students each year
- Level 1 course EG1009/EG1012 Fundamentals of Engineering Materials (2010-11 – 2015-16) – course design and development as a part of Curriculum Reform (CREF) implementation; course co-ordination; 50% delivery of lectures, tutorials, labs; more than 200 students each year
- Supervising undergraduate BEng/MEng and postgraduate MSc project students
- Publications
-
Page 1 of 1 Results 1 to 91 of 91
Thermomechanical Analysis of Sandwich Pipes with Graded Core
Advanced Structured Materials. Springer, pp. 75-88, 14 pagesChapters in Books, Reports and Conference Proceedings: Chapters- [ONLINE] DOI: https://doi.org/10.1007/978-3-031-56132-0_4
- [ONLINE] View publication in Scopus
Response of carbon/PEEK automotive driveshafts with/without an inner isotropic layer at high temperature considering temperature-dependent material properties
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 237, no. 6, pp. 1406-1415Contributions to Journals: ArticlesFailure analysis of a composite riser pipe under operational and spooling loads
Procedia Structural Integrity, vol. 42, pp. 614-622Contributions to Journals: ArticlesCoupled thermomechanical analysis of thermoplastic composite pipe by FEM simulations
ECCOMAS Congress 2022 - 8th European Congress on Computational Methods in Applied Sciences and Engineering: Computational Solid Mechanics, 2022. Scipedia, 10 pagesChapters in Books, Reports and Conference Proceedings: Chapters (Peer-Reviewed)Numerical modelling of spoolable thermoplastic composite pipe (TCP) under combined bending and thermal load
Ships and Offshore Structures, vol. 17, no. 9, pp. 1975-1986Contributions to Journals: ArticlesDevelopment of the consistent second-order plate theory for transversely isotropic plates and its analytical assessment from the three-dimensional perspective
Thin-walled Structures, vol. 163, 107704Contributions to Journals: ArticlesAnalysis of filament-wound sandwich pipe under combined internal pressure and thermal load considering restrained and closed ends
International Journal of Pressure Vessels and Piping, vol. 191, 104350Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijpvp.2021.104350
- [ONLINE] View publication in Scopus
Corrigendum to “Effects of thermal gradient on failure of a thermoplastic composite pipe (TCP) riser leg” [Int. J. Pres. Ves. Pip. 172 (2019) 90–99]
International Journal of Pressure Vessels and Piping, vol. 190, 104172Contributions to Journals: Comments and Debates- [ONLINE] DOI: https://doi.org/10.1016/j.ijpvp.2020.104172
On the friction drag reduction mechanism of streamwise wall fluctuations
International Journal of Heat and Fluid Flow, vol. 86, 108686Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijheatfluidflow.2020.108686
- [ONLINE] View publication in Scopus
Polymer Composites in the Aerospace Industry: second edition Edited by P. E. Irving and C. Soutis Woodhead Publishing, Elsevier, The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, UK. 2020. xiv; 673 pp. Illustrated. £255. ISBN 978-0-08-102679-3.
Aeronautical Journal, vol. 124, no. 1282, pp. 2066-2067Contributions to Journals: Reviews of Books, Films and Articles- [ONLINE] DOI: https://doi.org/10.1017/aer.2020.118
On the interaction of delamination buckling and damage growth in cross-ply laminates
International Journal of Solids and Structures, vol. 202, pp. 912-928Contributions to Journals: ArticlesAssessment of the consistent second-order plate theory for isotropic plates from the perspective of the three-dimensional theory of elasticity
International Journal of Solids and Structures, vol. 185-186, pp. 257-271Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijsolstr.2019.08.035
- [OPEN ACCESS] http://aura.abdn.ac.uk/bitstream/2164/15033/1/Isotropic_Plate_paper_RK_MK_AAM.pdf
- [ONLINE] View publication in Mendeley
- [ONLINE] View publication in Scopus
Structural integrity of deepwater composite pipes under combined thermal and mechanical loading
Contributions to Journals: Conference ArticlesThree-dimensional elasticity analysis of sandwich panels with functionally graded transversely isotropic core
Archive of Applied Mechanics, vol. 89, no. 12, pp. 2463-2484Contributions to Journals: ArticlesFailure analysis of thermoplastic composite pipe (TCP) under combined pressure, tension and thermal gradient for an offshore riser application
International Journal of Pressure Vessels and Piping, vol. 178, 103998Contributions to Journals: ArticlesActive and passive in-plane wall fluctuations in turbulent channel flows
Journal of Fluid Mechanics, vol. 866, pp. 689-720Contributions to Journals: ArticlesEffects of thermal gradient on failure of a thermoplastic composite pipe (TCP) riser leg
International Journal of Pressure Vessels and Piping, vol. 172, pp. 90-99Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijpvp.2019.03.027
- [OPEN ACCESS] http://aura.abdn.ac.uk/bitstream/2164/13898/1/1_s2.0_S0308016118305258_main.pdf
- [ONLINE] View publication in Scopus
- [ONLINE] View publication in Mendeley
Engineering critical assessment for a sandwich pipe field joint
Ocean Engineering, vol. 172, pp. 788-802Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.oceaneng.2018.11.020
- [OPEN ACCESS] http://aura.abdn.ac.uk/bitstream/2164/13438/1/OE_2018_697_R1_unmarked.pdf
- [ONLINE] View publication in Scopus
- [ONLINE] View publication in Mendeley
Graded Insulation to Improve High Pressure Resistance in Deepwater Flowlines: a Closed Form Analytical Elastic Solution
New Achievements in Continuum Mechanics and Thermodynamics: A Tribute to Wolfgang H. Müller. Abali, B. E., Altenbach, H., dell'Isola, F., Eremeyev, V. A., Öchsner, A. (eds.). Springer, pp. 433-446, 14 pagesChapters in Books, Reports and Conference Proceedings: Chapters- [ONLINE] DOI: https://doi.org/10.1007/978-3-030-13307-8_29
- [ONLINE] View publication in Scopus
- [ONLINE] View publication in Mendeley
Threaded Connectors for Sandwich Pipes – Part 1: Parametric & Comparative Studies
International Journal of Pressure Vessels and Piping, vol. 168, pp. 117-124Contributions to Journals: ArticlesThreaded Connectors for Sandwich Pipes – Part 2: Optimisation of Stress Relief Groove
International Journal of Pressure Vessels and Piping, vol. 168, pp. 125-131Contributions to Journals: ArticlesCoupled stress and energy criterion for multiple matrix cracking in cross-ply composite laminates
International Journal of Solids and Structures, vol. 139-140, pp. 189-199Contributions to Journals: ArticlesHashin’s bounds for elastic properties of particle-reinforced composites with graded interphase
International Journal of Solids and Structures, vol. 138, pp. 224-235Contributions to Journals: ArticlesModelling Cracked Cross-Ply Laminates with Delamination Buckling
Key Engineering Materials, vol. 744, pp. 60-65Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.4028/www.scientific.net/KEM.774.60
Finite element analysis of a sandwich pipe joint
Ocean Engineering, vol. 146, pp. 363-374Contributions to Journals: ArticlesEffect of graded interphase on the coefficient of thermal expansion for composites with spherical inclusions
International Journal of Solids and Structures, vol. 110-111, pp. 80-88Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijsolstr.2017.02.001
- [OPEN ACCESS] http://aura.abdn.ac.uk/bitstream/2164/9990/1/CTE_paper_accepted_version.pdf
- [ONLINE] View publication in Scopus
Modeling of damage in an mmc with lamellar microstructure
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] DOI: https://doi.org/10.1002/9781119321811.ch18
- [ONLINE] View publication in Scopus
Influence of the Crack Widening on the Transverse Cracking in Lamellar Metal-Ceramic Composites
Key Engineering Materials, vol. 754, pp. 83-86Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.4028/www.scientific.net/KEM.754.83
Elasticity analysis of sandwich pipes with functionally graded interlayers
European Journal of Mechanics A/Solids, vol. 59, pp. 232-241Contributions to Journals: ArticlesModelling of stiffness degradation due to cracking in laminates subjected to multi-axial loading
Philosophical Transactions of the Royal Society A: Mathematical, Physical & Engineering Sciences, vol. 374, no. 2071, pp. 1-16Contributions to Journals: ArticlesAnalysis of multiple cracking in metal/ceramic composites with lamellar microstructure
Archive of Applied Mechanics, vol. 86, no. 1, pp. 177-188Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1007/s00419-015-1103-7
- [OPEN ACCESS] http://aura.abdn.ac.uk/bitstream/2164/7935/1/paper.pdf
Evolution of crack density in cross-ply laminates. Application of a coupled stress and energy criterion
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] DOI: https://doi.org/10.4028/www.scientific.net/KEM.713.262
- [ONLINE] View publication in Scopus
Transverse cracking in metal/ceramic composites with lamellar microstructure
Procedia Structural Integrity, vol. 2, pp. 3377-3384Contributions to Journals: ArticlesA piecewise exponential model for three-dimensional analysis of sandwich panels with arbitrarily graded core
International Journal of Solids and Structures, vol. 75-76, pp. 188-198Contributions to Journals: ArticlesStress analysis of cracked MMCs with Lamellar microstructure
Key Engineering Materials, vol. 627, pp. 345-348Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.4028/www.scientific.net/KEM.627.345
- [ONLINE] View publication in Scopus
Three-dimensional elastic deformation of functionally graded isotropic plates under point loading
Composite Structures, vol. 118, pp. 367-376Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.compstruct.2014.07.013
- [OPEN ACCESS] http://aura.abdn.ac.uk/bitstream/2164/4255/1/AURA_manuscript.pdf
Flexural behaviour of sandwich panels with graded core: A piecewise exponential model
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] http://www.escm.eu.org/eccm16/assets/0866.pdf
- [ONLINE] View publication in Scopus
Analysis of bolted flanged panel joint for GRP sectional tanks
Applied Composite Materials, vol. 21, no. 1, pp. 247-261Contributions to Journals: ArticlesInfluence of microstructural transformation on quasistatic and dynamic thermomechanical response of thermally loaded disk
Mathematical Modeling and Computing, vol. 1, no. 2, pp. 284-293Contributions to Journals: Articles- [ONLINE] View publication in Scopus
Numerical modelling of functionally graded coatings
Advanced Materials Research, vol. 829, pp. 327-331Contributions to Journals: ArticlesPredicting residual stiffness of cracked composite laminates subjected to multi-axial inplane loading
Journal of Composite Materials, vol. 47, no. 20-21, pp. 2513-2524Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1177/0021998313488809
- [OPEN ACCESS] http://aura.abdn.ac.uk/bitstream/2164/9652/1/AURA_manuscript.pdf
Finite element modelling of sandwich panels with graded core under varioius boundary conditions
The Aeronautical Journal, vol. 116, no. 1186, pp. 1289-1314Contributions to Journals: ArticlesFinite element modelling of sandwich panels with graded core under various boundary conditions
Aeronautical Journal, vol. 116, no. 1186, pp. 1289-1314Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1017/S0001924000007648
- [ONLINE] View publication in Scopus
Numerical modeling of functionally graded materials using a variational formulation
Continuum Mechanics and Thermodynamics, vol. 24, no. 4-6, pp. 377-390Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1007/s00161-012-0244-y
Damage mechanisms in cross-ply fibre-reinforced composite laminates subjected to multi-axial in-plane loading and their effect on the laminate stiffness properties
The Wiley Encyclopedia of Composites. Nicolais, L., Borzacchiello, A., Lee, S. M. (eds.). 2nd edition edition. Wiley InterScience, pp. 688-703, 16 pagesChapters in Books, Reports and Conference Proceedings: ChaptersPerformance of functionally graded plates under localised transverse loading
Composite Structures, vol. 94, no. 7, pp. 2254-2262Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.compstruct.2012.02.012
Dissipative heating and thermal fatigue life prediction for structures containing piezoactive layer
Technische Mechanik, vol. 32, no. 2-5, pp. 238-250Contributions to Journals: Articles3D elasticity analysis of sandwich panels with graded core under distributed and concentrated loadings
International Journal of Mechanical Sciences, vol. 53, no. 10, pp. 872-885Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijmecsci.2011.07.011
Three-dimensional elasticity solution for bending of transversely isotropic functionally graded plates
European Journal of Mechanics A/Solids, vol. 30, no. 5, pp. 705-718Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.euromechsol.2011.04.003
Residual stiffness of cracked cross-ply composite laminates under multi-axial in-plane loading
Applied Composite Materials, vol. 18, no. 1, pp. 31-43Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1007/s10443-010-9150-2
General love solution in the linear inhomogeneous transversely isotropic theory of radius-dependent elasticity
International Applied Mechanics, vol. 46, no. 4, pp. 367-376Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1007/s10778-010-0318-0
General love solution in the linear isotropic inhomogeneous theory of radius-dependent elasticity
International Applied Mechanics, vol. 46, no. 3, pp. 245-254Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1007/s10778-010-0304-6
Love solutions in the linear inhomogeneous transversely isotropic theory of elasticity
International Applied Mechanics, vol. 46, no. 2, pp. 121-129Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1007/s10778-010-0289-1
General Hoyle-Youngdahl and Love solutions in the linear inhomogeneous theory of elasticity
International Applied Mechanics, vol. 46, no. 1, pp. 1-17Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1007/s10778-010-0276-6
Bending response of sandwich panels with graded core: 3D elasticity analysis
Mechanics of Advanced Materials and Structures, vol. 17, no. 8, pp. 586-594Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1080/15376494.2010.517728
Effect of residual stresses on wave propagation in adhesively bonded multilayered MEMS structures
Computer Modeling in Engineering & Sciences, vol. 57, no. 1, pp. 1-30Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.3970/cmes.2010.057.001
Vibration analysis of thin-wall structures containing piezoactive layers
IOP Conference Series. Materials Science and Engineering, vol. 10Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1088/1757-899X/10/1/012174
Modelling off-axis ply cracking and crack-induced delaminations in fibre-reinforced polymer laminates
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] View publication in Scopus
Revisiting displacement functions in three-dimensional elasticity of inhomogeneous media
International Journal of Solids and Structures, vol. 46, no. 18-19, pp. 3463-3470Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijsolstr.2009.06.001
Effect of a functionally graded interlayer on three-dimensional elastic deformation of coated plates subjected to transverse loading
Composite Structures, vol. 89, no. 2, pp. 167-176Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.compstruct.2008.07.007
Three-dimensional elasticity solution for sandwich panels with a functionally graded core
Composite Structures, vol. 87, no. 1, pp. 36-43Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.compstruct.2007.12.003
Use of a functionally graded interlayer to improve bonding in coated plates
Journal of Adhesion Science and Technology, vol. 23, no. 10-11, pp. 1591-1601Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1163/156856109X433081
Matrix cracking in polymeric composites laminates: Modelling and experiments
Composites Science and Technology, vol. 68, no. 12, pp. 2310-2317Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.compscitech.2007.09.013
3D elastodynamics of an interface crack
XXII International Congress of Theoretical and Applied Mechanics, pp. 273Contributions to Conferences: Abstracts3D elastodynamics of an interface crack
Chapters in Books, Reports and Conference Proceedings: Conference ProceedingsThree-dimensional analysis of a functionally graded coating/substrate system of finite thickness
Proceedings of the Royal Society of London - A Mathematical and Physical Sciences, vol. 366, no. 1871, pp. 1821-1826Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1098/rsta.2007.2194
Materials with graded coating under transverse loading
Proceedings in Applied Mathematics and Mechanics (PAMM), vol. 7, no. 1, pp. 2090009-2090010Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1002/pamm.200700339
Three-dimensional elastic deformation of a functionally graded coating/substrate system
International Journal of Solids and Structures, vol. 44, no. 16, pp. 5272-5288Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijsolstr.2006.12.035
Elastodynamics of interface cracks in laminated composites
International Conference on Deformation and Fracture of Composites, pp. 75Contributions to Conferences: AbstractsStiffness and fracture analysis of laminated composites with off-axis ply matrix cracking
Composites Part A: Applied Science and Manufacturing, vol. 38, no. 4, pp. 1262-1269Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.compositesa.2006.07.001
Mechanisms of internal damage and their effect on the behavior and properties of cross-ply composite laminates
Advances of Mechanics. Guz, A. (ed.). A.S.K., KievChapters in Books, Reports and Conference Proceedings: ChaptersModelling off-axis ply matrix cracking in continuous fibre-reinforced polymer matrix composite laminates
Journal of Materials Science, vol. 41, no. 20, pp. 6789-6790-6799Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1007/s10853-006-0207-4
Compressive fracture of layered hyperelastic materials with inter - And intralaminar defects
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] View publication in Scopus
Deformation of cross-ply composite laminates with cracked ceramic matrix
Prikladnaya Mekhanika, vol. 41, no. 1, pp. 37-46Contributions to Journals: Articles- [ONLINE] View publication in Scopus
Modelling damage in laminate composites
Multi-scale modelling of composite material systems: The art of predictive damage modelling. Soutis, C., Beaumont, P. (eds.). Woodhead PublishingChapters in Books, Reports and Conference Proceedings: ChaptersAnalysis of composite laminates with intra- and interlaminar damage
Progress in Aerospace Sciences, vol. 41, no. 2, pp. 152-173Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.paerosci.2005.03.004
Application of the boundary shape perturbation method to stress analysis of laminated composites with ply waviness
Composites Part A: Applied Science and Manufacturing, vol. 36, no. 2, pp. 137-143Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.compositesa.2004.06.006
Deformation of cross-ply composite laminates with cracked ceramic matrix
International Applied Mechanics, vol. 41, no. 1, pp. 24-31Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1007/s10778-005-0054-z
Three-dimensional elasticity solution for bending of functionally graded rectangular plates
European Journal of Mechanics A/Solids, vol. 23, no. 5, pp. 853-864Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.euromechsol.2004.04.002
Analysis of matrix crack-induced delamination in composite laminates under static and fatigue loading
Fatigue in Composites: Science and Technology of the Fatigue Response of Fibre-Reinforced Plastics. PERGAMON-ELSEVIER SCIENCE LTD, pp. 470-503, 34 pagesChapters in Books, Reports and Conference Proceedings: Chapters- [ONLINE] View publication in Scopus
Analysis of matrix crack-induced delamination in composite materials under static and fatigue loading
Fatigue in Composites: Science and technology of the fatigue response of fibre-reinforced plastics. Harris, B. (ed.). Woodhead PublishingChapters in Books, Reports and Conference Proceedings: ChaptersModelling multilayer damage in cross-ply ceramic matrix composites
Chapters in Books, Reports and Conference Proceedings: Conference ProceedingsAnalytical determination of interlaminar stresses in thick multidirectional composite laminates with ply waviness.
Contributions to Conferences: Other ContributionsFracture analysis of delaminations induced by angle-ply matrix cracking in continuous fibre-reinforced composite laminates
Chapters in Books, Reports and Conference Proceedings: Conference ProceedingsMechanisms of internal damage and their effect on the behaviour and properties of cross-ply composite laminates
International Applied Mechanics, vol. 38, no. 6, pp. 641-657Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1023/A:1020456726805
Strain energy release rate for crack-induced delaminations in fibre-reinforced composite laminates
Chapters in Books, Reports and Conference Proceedings: Conference ProceedingsAnalysis of local delaminations in composite laminates with angle-ply matrix cracks
International Journal of Solids and Structures, vol. 39, no. 6, pp. 1515-1537Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/S0020-7683(02)00007-0
Delamination growth and residual properties of cracked orthotropic laminates under tensile loading
Journal of Thermoplastic Composite Materials, vol. 15, no. 1, pp. 13-22Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1106/089270502022859
Strain energy release rate for local delaminations in composite laminates with off-axis ply cracks
Chapters in Books, Reports and Conference Proceedings: Conference ProceedingsStrain energy release rate for off-axis ply cracking in laminates composites
International Journal of Fracture, vol. 112, no. 2, pp. L3-L8Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1023/A:1022610402864
Stress analysis of angle-ply laminates with matrix cracks
Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik (ZAMM), vol. 81, no. Suppl. 2, pp. S371-S372Contributions to Journals: Abstracts